Welcome to CompuCare
Products In Network Accessories Category
High Surge Protection with R30 000 warranty.
Max connected load: 3680W.
Protects one appliance only.
Safety shuttered for your protection.
Manufactured with flame retardant materials.
Absorbs up to 20 000 Amps on the telephone line.
Repair or Replace warranty terms and conditions apply.
- Fan exhaust hole (Fan unit optional)
- Removable side panels (Side lock optional)
- Knock off hole for entering cable on both top cover,bottom panel,real panel
- Zinc plated mounting profile (Ground wire optional)
- Front tempered glass door with metal perforated border
- fans, shelf, PDU are optional
Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the NanoBeam® 5AC Gen 2.
Improved Noise Immunity
The NanoBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 5AC Gen 2 gets maximum gain out of the smallest footprint. Providing high performance and an innovative form factor, the NanoBeam 5AC Gen 2 is versatile and cost?effective to deploy.
The NanoBeam 5AC Gen 2 features airMAX ac technology and enhanced protection against ESD events.
Ease of Installation
• Quick Installation No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting.
• Convenient Alignment The NanoBeam 5AC Gen 2 pivots on its ball joint 3-axis mount for easy aiming.
Innovative Mechanical Design
• Efficient Footprint The radio and antenna are combined into a single body that takes up minimal space. The form factor features the highest gain for its size.
• Aesthetics The NanoBeam 5AC Gen 2 is small enough to blend discreetly into the background at a customer's location.
• Versatile Mounting The NanoBeam 5AC Gen 2 can be mounted in almost any position needed for line of sight.
Specification:
Dimensions (Mount Included): 189 x 189 x 125 mm (7.44 x 7.44 x 4.92")
Weight (Mount Included): 0.530 kg (1.17 lb)
Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
Max. Power Consumption: 8.5W
Gain: 19 dBi
Networking Interface: (1) 10/100/1000 Ethernet Port, Wi-Fi for Management
Processor Specs: Atheros MIPS 74Kc, 720 MHz
Memory: 128 MB DDR2, 8 MB Flash
LEDs: Power, Ethernet, (4) Signal Strength
Signal Strength: LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Max. VSWR: 1.5:1
Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz
Channel Sizes PtMP Mode: 10/20/30/40 MHz
Polarization: Dual Linear
Enclosure: Outdoor UV Stabilized Plastic
Mounting: Pole-Mount (Kit Included), Wall-Mount
Wind Loading: 45.4 N @ 200 km/h (10.2 lbf @ 125 mph)
Wind Survivability: 200 km/h (125 mph)
ESD/EMP Protection: Air: ± 24 kV, Contact: ± 24 kV
Operating Temperature: -40 to 80° C (-40 to 176° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
RoHS Compliance: Yes
Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test: IEC 68-2-6
Temperature Shock: Test IEC 68-2-14
UV Test: IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
NBE-5AC-Gen2 Operating Frequency: 2412 - 2472 MHz, 5150 - 5875 MHz
- Share with friends internet access for up to 10 devices simultaneously
- 2000 mAh battery for 8 hours of usage
- Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions
- Easy management with the tpMiFi App
- Boosts your existing Wi-Fi coverage to deliver fast and reliable wired and wireless connectivity*
- External antennas for faster and more reliable Wi-Fi
- Supports AP mode which creates a new Wi-Fi Access point
- Easily expand wireless coverage at a push of the Range Extender button*
- Set the Power Schedule for the range extender for power-saving
- Works with Any Wi-Fi Router**
- Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
Ubiquiti's POE-247W is a 24V, 0.3A, Gigabit PoE injector which is compatible with a variety of Ubiquiti PoE devices. Features such as, surge protection, clamping protection, maximum surge discharge and peak pulse current aids in protecting your PoE devices. It also offers protection against Electrostatic Discharge Damage (ESD), the leading cause for outdoor device failures.
Yeastar's EX08 Module has 4 on-board module slots and 8 interfaces on the panel and is compatible with Yeastar's S-Series S100 and S300 models.
A large outdoor area, such as a park with minimal infrastructure, can take advantage of a mesh network comprised of Ubiquiti's UniFi AC Mesh models. The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5GHz omni antenna for spot-beam coverage in high-density locations with numerous APs and clients. It is ideal for applications requiring 2x2 MIMO data rates for close-in omni coverage and installations requiring quick setup and takedown, such as a music festival or concert venue.
The UniFi AC Mesh AP can be used indoors or outdoors and can be mounted on a wall, pole, or fast-mount of a Ubiquiti high-gain antenna. The UniFi AC Mesh AP is compatible with 802.3af PoE Alternative A and 24V passive PoE. You can power it with an 802.3af Alternative A compatible switch, EdgePoint™ EP-R6, UniFi PoE Switch, or a Gigabit PoE adapter.
Use the included omni antennas, or use the included fast-mount adapter to install the AP on an optional connectorized antenna for expanded range coverage and customized pattern shaping.
Aruba 1G SFP LC SX MMF-Transceiver, 500 m, from OM2
This HP J4858C compatible SFP transceiver provides 1000Base-SX Gigabit Ethernet and Fiber Channel connectivity. It supports 550m transmission distance at 850nm over multimode fiber. It fully complies with the Multi-Sourcing Agreement (MSA) and can be used on the MSA compliant networking equipment. This module is programmed and tested to ensure working with HP Ethernet Switches, Ethernet Routers, Network Interface Cards (NICs) and Media Converters. It provides an ideal cost-effective replacement to HP ProCurve Gigabit-SX-LC Mini-GBIC (J4858C), which provides a reliable compatible solution for system integrator, distributors and end-users in network infrastructure and fiber cabling.
Features
• Functionally similar to HP J4858C mini-GBIC transceiver
• Support Up to 1.25Gb/s data links
• Compliant with IEEE 802.3z
• Single 3.3V power supply
• Duplex LC connector
• Low power dissipation
• The metal enclosure provides lower EMI
Dell 770-BBIN Ready Rails 2U Sliding Rails - Kit, for R530 / R540 / R730 / R740 / R730xd / R740xd servers
Overview:
The Ready Rails sliding rail kit for 2U Systems, provides tool-less support for racks with square or unthreaded round mounting holes including all generations of Dell racks. They also support tooled mounting in 4-post threaded racks via an optional adapter brackets kit. The optional cable management arm (CMA) can be mounted on either the left or right side of the sliding rails without the use of tools for fast and easy deployment. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.
Manufacturer Part# : 0384R
Dell Part# : 770-BBIN
Features:
This product is compatible with the following systems:
- PowerEdge R530
- PowerEdge R540
- PowerEdge R730
- PowerEdge R740
- PowerEdge R740XD
- PowerEdge R7415
- PowerEdge R7425
The Rail Kit for Rackmount Models from QNAP is a set of rails that will support select QNAP rackmount models, including the TVS-871U-RP, TVS-1271U-RP, TVS-471U, TVS-471U-RP, TS-463U, TS-463U-RP, TS-863U, TS-863U-RP, TS-1263U, and TS-1263U-RP.
- Great Compatibility: Compatible with the majority of USB devices on the market
- Easy to use: Ease setup with Installation Wizard simply by several clicks
- Expandable application: Share up to 4 USB devices by connecting to a USB hub
- Compatible with up to 230 printer models on the market
- Supports multi-protocol and multi-OS, easy to set up in almost all network environments
- Supports POST (Power On Self Test) and E-mail Alert, to help identify printing problems as soon as possible
- Simple setup and management, very easy to operate
- Compact and smart design, can be located almost anywhere
The 24V PoE Adapter from Ubiquiti Networks powers a variety of Ubiquiti PoE devices belonging to the airFiber, airMAX, airVision, UniFi, and mFi series. This 24V adapter provides protection against surge, clamping, maximum surge discharge, peak pulse current, and ESD attacks.
MikroTik's RB-FTPC is a Fibre to Copper converter. Unlike many other media converters available on market, FTC has an outdoor waterproof case with lock screw.
The device supports 12-57V PoE with 802.3af/at. It is supplied with a PoE injector and power supply. The case has a mounting system that is secured by a screw from inside the lockable case, making the device hard to access by unauthorised individuals.
- Specs: 250V AC, 50/60 HZ
- Dimensions (mm): 120 x 120 x 38
- Air flow: 50-110 CBM/H
- Noise: ≤ 48dB
- Operating Temperature: 0ºC - 70ºC
- Mounting position: Horizontal mounting on the top of the cabinet
- Frame: Aluminium
- Performance: UL, CSA certified
- Colour: black, nickel plated
- One Port Single Gang
- Color: White
- Perfect for use with Networx Keystone Jacks
Scoop's LB-FM3 wall plate by Linkbasic is made from high-impact ABS plastic, making for years of durable use.
The LB-FM3 blends into the decor of your home or office and protects/hides your network connections. It accepts all keystone inserts and standard 110 type IDC termination makes installation fast and easy.
The LB-FM2 wall plate by Linkbasic is made from high-impact ABS plastic, making for years of durable use.
The LB-FM2 blends into the decor of your home or office and protects/hides your network connections. It accepts all keystone inserts and standard 110 type IDC termination makes installation fast and easy.
* RJ45 and RJ11 keystone Jacks sold separately.
Linkbasic's LB-FM1, wall plate by Linkbasic is made from high-impact ABS plastic, making for years of durable use.
The LB-FM1 blends into the decor of your home or office and protects/hides your network connections. It accepts all keystone inserts and standard 110 type IDC termination makes installation fast and easy
D-Link High Speed 2.4GHz (11g) Wireless CardBus Adapter
D-Link, the industry pioneer in wireless networking, introduces another performance breakthrough in wireless connectivity—the D-Link AirPlus Xtreme G™ series of high-speed devices capable of transfer rates up to 108Mbps1.
The D-Link AirPlus DWL-G650 Cardbus Adapter is a wireless cardbus featuring the very latest in advanced wireless silicon chip technology including enhanced security to shield and protect your wireless communication from intruders. The DWL-G650 also works with 802.11b standard wireless devices and when used with other D-Link AirPlus Xtreme G products delivers throughput speeds capable of handling heavy data payloads including real-time MPEG video streaming.
The DWL-G650 features 802.1x for wireless user authentication, as well as WPA* (Wi-Fi Protected Access) providing you a much higher level of security for your data and communications than has previously been available in a wireless networking solution.
The D-Link AirPlus DWL-G650 also includes a configuration utility to discover available wireless networks and create and save detailed connectivity profiles for those networks most often accessed.
The DWL-G650 is a powerful 32-bit cardbus adapter that installs quickly and easily into laptop PCs and when used with other D-Link AirPlus Xtreme G products automatically connects to the network. Like all D-Link wireless adapters, the DWL-G650 can be used in ad-hoc mode to connect directly with other cards for peer-to-peer file sharing or in infrastructure mode to connect with a wireless access point or router for access to the Internet in your office or home network.
Product Features:
- Up to 108Mbps1
- Works with 802.11b Devices
- Great for Video Streaming
Tenda L8139D Auto-Negotiation Ethernet Adapter 10/100Mbps PCI 1 x RJ45 The Tenda L8139D 10/100 Network Adapter delivers reliable wired network connectivity for your desktop PC. It fits well into the PCI slot of your desktop and delivers up to 200Mbps full duplex bandwidth for optimum performance. Use this adapter to access Internet, surf the web, check e-mail, and share documents, music, and photos through your wired network.
Tenda TEL9901G Gigabit Ethernet Adapter 10/100/1000Mbps PCI 1 x RJ45
The DGE-560T Gigabit PCIe Network Adapter is a high performance adapter designed for the high-speed PCI Express Bus Architecture. The DGE-560T offers increased bandwidth, reliability, and more functionality than standard PCI network cards. It is specifically designed to allow throughput at rates of up to 2Gbps, eliminating the bottleneck that exists with current 32-bit and 64-bit PCI bus architectures. Advanced features such as 802.3x flow control, SNMP for network monitoring and management, and Jumbo Frame interoperability with your current networking equipment are also supported.
Scoop's ST-CAGE, Cabinet Cage Nuts by Linkbasic are fit for a 19" cabinet, and rack. A cage nut is used on a rack that has square mounting holes. You would use a cage nut when you need to mount a product in your rack that requires a threaded hole. Although some modern rack-mount servers have a bolt-free fitting, other components such as shelves, networking hardware, UPSs and KVM switches still tend to be fitted using cage nuts.
Redstrut’s 19- Inch Brush Panel maintains cabinet neatness and tidiness by enabling the patch leads to be pushed through the panel and out of sight. Brush Panels are manufactured from mild steel and powder coated. Redstrut’s 19- Inch networking cabinets offers a comprehensive line of Server Rack Cabinets for the electronics, data, telecommunications and computer industries. Brush Panels can be utilized for both free-standing and wall-mountable cabinets.
Conforming to BS1363 our units have been designed specifically for 19” cabinet use, although as they are manufactured in the 'vertical' configuration, they can be floor mounted if required. Constructed from high grade Aluminium alloy with polycarbonate sockets, each unit provides a strong tough exterior to take the punishment of prolonged usage. All ‘Powerlynx’ units exhibit strong attention to detail with 1mm thick fixing brackets, to retain rigidity, and a shrouded mains switch to protect from accidental operation. Rear mains cord entry on the horizontal units provides ease of cabinet mounting and individual packing allows the unit to be transported safely without transit damage. Body: Body Material: Extruded Aluminium Body. Colour: Black Socket Colour: Black. End Cap Material: Coated Steel. End Cap Colour: Black Wiring: Cable Rating: 240VAC - 13 Amp. Fuse Rating: 13 Amp. Cross Sectional Area: >1.5mm². Earth Connection: Single Point, Internal. Packaging: Box Type: Cardboard. Cardboard Thickness: 2.3mm +/- 0.2mm. Mains Plug: Plastic Protector Fitted Transit. Packing: Double Walled Bo
TP-Link MC200CM Gigabit Multi-Mode Media Converter 1 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Complies with IEEE 802.3ab and IEEE 802.3z Extends fiber distance up to 1,800 feet (550m)
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.
Jabra Cord - QD to Modular RJ extension coiled cord
Extension Lead, 12 Way Outlets Vertical Tower Power Strip with 5 Smart USB Charging Ports 10A/2500W Surge Protector Extension Socket with 2m/6.5ft Extension Cord - 1000 Joules (Black)
Compatibility: Use The Spiral Wire Wrap To Organize The Cables Coming From Your Desktop Computer, Entertainment System, Or Other Devices That Have Cluttered, Disorganized Cables. Cable Management: This Cable Management Sleeve Is Perfect For Gathering All Your Cables Into One Manageable Bundle. No More Tripping Over Tangled Wires! Easy To Use: To Install, Just Wrap The Desired Wires Within The Spiral Wrap, And Then Cut To Your Desired Length. Flexible: The Super Flexible Polyethylene Material Lets You Arrange The Cables The Way You Want While Still Protecting Them From Damage. Specifications: 20Mm Outside Diameter; 1.5M Long; Black Color
MP-06WIEC is a 6-way multi-plug that is made up of 3x16A 3-pin sockets, and 3x 5A 2-pin sockets. This multi-plug has a half meter cord with a moulded IEC plug and offers overload protection.
No electrical tap, No splicing, no crimping, but only a small screw driver. – Easier for camera installation, save time and more securer cable connection. – 5.5mm x 2.1mm Female power plug connector. – External diameter of the plug: 5.5mm. – Internal diameter of the plug: 2.1mm. – Dimension: 38mm(L) x 14mm(W) x 13mm(H)
Sleek miniature design so small that once plugged in, can be left in a Laptop’s USB port Speedy wireless transmission at up to 150Mbps ideal for
- Multi-Port: Three USB 3.1 Gen 1 Type A port; USB 3.1 Type-C Port for PD charger; HDMI Port, 4K ready
- Compact and Highly Integrated Design; Plug & Play; No Drivers Needed; USB hot-plugging
- Heat Management with Aluminum Casing and Durable design; Design for Mac OS X 10.10 or higher, Windows 10, or Chrome OS with USB-C port
- USB 3.1 Specs & VESA DisplayPort Alt Mode; HDMI 1.4 Specs; HDMI Display up to 4K@30Hz; Compliant to USB Type-C Cable & Connector Specs Rev 1.1
- Compliant USB Power Delivery Specs Rev 2.0; Adaptive Voltage
TP-LINK TL-UE300 USB 3.0 to RJ45 Gigabit Ethernet Network Adapter Supporting 10/100/1000 Mbps Ethernet, Plug and Play by TP-LINK
- Connect your laptop, tablet & phone to TV's, External Monitors & Projectors effortlessly - Extend device connectivity by converting a single USB port - Converts USB port to HDMI, VGA & Gigabit Ethernet
The Balun-PV5FM is a CAT-5 balun used to transmit video and power for CCTV cameras up to 1500 feet. The PV5FM is also known as a UTP balun because any UTP / STP cable / wire can be used with it (not necessarily CAT5). This video balun pair that allows a surveillance system installer to run a CCTV video signal up to 1500 feet. Please note that although this balun also supports transmitting pwer to cameras also, it is typically not realistic for DC power to run a distance of 1500 feet without voltage drop. The Balun-PV5FM is sold as a set which includes one power end with a male and the other with a female connector. PT-3 and PT-4 pigtail leads can be used to change the power plugs to positive and negative raw cable leads if needed.
Elegant USB 3.0 Hub with Ethernet Adapter The elegant Sharkoon 3-Port USB 3.0 Aluminium Hub allows convenient expansion with three additional USB 3.0 ports as well as a RJ45 connector. The integrated Ethernet adapter provides Gigabit Ethernet and is therefore well prepared for integration into fast networks. The external hub is available in both black and silve
USB Over RJ45?Adaptermvp RJ45 Cat Cable Extension Cable USB 2.0 Extender Over RJ45 Cat5 Cat 5e Cat6 Cable Extension Cable Connector Adapter Kit
This USB to Serial converter allows you to connect an RS-232 serial device such as a modem to a USB port on your desktop or laptop.
Compliant with Home Plug AV 1 * 10 / 100Mbps auto MDI / MDIX LAN port Up to 200Mbps transfer speed over electrical wiring 128-bit Advanced Encryption Security (AES) Power saving mode
This Multiplug has 3 (16A) sockets which converts your single plug point into multiple sockets. The extension cord allows you to extend your reach by 3m.
This 5 Way Multi-plug has 2 x 2 pin sockets and 3 x 3 pin sockets, converting your single plug point into multiple 2 pin and 3 pin plugs.
- Safety shuttered for your protection
- Overload Protection
- Reset Button
- Conforms to all South African National Standards
Expand the ports on your MacBook while charging. With power delivery, you don't have to worry about losing power while you're working.
Connect your computer to a wired Ethernet network via USB-C port with the new Gizzu USB-C to Ethernet adapter.
Connect your computer to a wired Ethernet network via USB-C port with the new Gizzu USB-C to Ethernet 10/100m adapter.
Connect your 3.5mm audio devices to your Type-C compatible notebooks with the Gizzu Type-C to 3.5mm Aux Audio Adapter. It is highly portable, easy to use and is made of high-quality materials with a durable design.
Connect your old 2.5″ HDD or SSD to a 3.5″ HDD bay with the Orico 2.5 to 3.5 HDD|SSD Caddy. It features an ABS material design and SATA3.0 interfaces, it is also compatible with various types of 2.5″ storage options whether HDD or SSD.
